Hook-and-loop wool felt polishing pad is made from high-density wool felt bonded with a strong hook-and-loop backing. It combines the cutting performance of wool with the stability of felt. The hook-and-loop design enables quick pad changes and is compatible with most electric or pneumatic polishers. Suitable for automotive paint polishing, metal/stone/wood mirror finishing, and light to medium scratch removal.
Product name: | Hook & loop wool polishing pad |
Material: | Wool felt + hook & loop backing |
Thickness: | 6/7/8/9/10 mm |
Density: | 0.35-0.65 g/cm3 |
Size: | 75/100/125/150 mm |
Max. safe speed: | ≤4000 RPM |
Backing: | Self-adhesive hook & loop fabric |
Application: | Car detailing, paint correction, boat polishing, furniture finishing, metal buffing |
Features
1. Hook & loop backing: strong adhesion, easy to change, compatible with 3–6 inch backing plates.
2. Wool felt material: denser than ordinary wool pads, providing even cutting and minimal linting.
3. Heat and wear resistant: suitable for medium to high speed polishing (3,000–6,000 RPM).
4. Flat edge design: helps reduce the risk of paint scratching, ideal for fine finishing.
5. Reusable: can be easily cleaned with compressed air or a dedicated pad brush.
1. Align and attach the hook-and-loop side to the polishing machine backing plate.
2. Apply a pea-sized amount of polishing compound to the pad or the surface.
3. Start at low speed (−2,000 RPM) to spread the compound, then increase speed for cutting and finishing.
4. After use, clean the felt surface with compressed air or a dedicated pad brush.
5. Do not use for dry sanding or on rough/gritty surfaces.
1. Automotive paint polishing and mirror finishing.
2. Metal/stainless steel/aluminum finishing (brushed or mirror).
3. Stone, engineered stone, and wood polishing.
